http://www.pepwave.com 35 Copyright © 5/23/16 Pepwave
User Manual
PEPWAVE AP Series
Check this box to block access from the LAN.
To specify a subnet to block, enter the IP address and choose a subnet mask from
the drop-down menu. To add the blocked subnet, click . To delete a blocked
subnet, click .
To create an exception to a blocked subnet (above), enter the IP address
and choose a subnet mask from the drop-down menu. To add the exception,
click . To delete an exception, click .
To block PepVPN access, check this box.
Bandwidth
Management Check this box to enable bandwidth management.
Upstream Limit Enter a value in kpbs to limit the wireless network’s upstream bandwidth. Enter 0 to allow unlimited
upstream bandwidth.
Downstream Limit Enter a value in kpbs to limit the wireless network’s downstream bandwidth. Enter 0 to allow
unlimited downstream bandwidth.
To Next Page
Loading...
Need help?
General
