Perkins M190C - E361 High Engine Coolant Temperature

108 KENR9126
Troubleshooting Section
Possible Performance Effect:
360-1
Engine operat
ion is not affected.
360-2
The ECM will derate power by 17.0 percent per
second up to a maximum of 100 percent while the
derate is ac
tive.
Troubleshooting:
Refer to Troubleshooting, “Low Engine Oil Pressure”.
Results:
•
OK – STOP.
i04012513
E361 High Engine Coolant
Temperat
ure
Conditions Which Generate This Code:
The Elec
tronic Control Module (ECM) detects a
high engine coolant temperature under the following
conditions:
•
The engine has been running for more than 185
seconds.
•
The trip point for the event code for the temperature
of the engine coolant is reached.
•
Diagnostic code 0110-03 Engine Coolant
Temperature voltage above normal is not active.
•
Diagnostic code 0110-04 Engine Coolant
Temperature voltage below normal is not active.
•
Diagnostic code 0168-01 Electrical System voltage
low is not active.
Tab
le 26
Trip Points for the Engine Coolant Temperature
E361-1 E361-2
Trip Point
103° C (217° F) 111° C (232° F)
Delay to Activation 30 seconds 30 seconds
Reset Time 5 seconds 5 seconds
System Response:
If equipped, the diagnostic lamp will come on and the
event code will be logged.
Possible Pe rformance Effect:
E361-1