Perkins M190C - No Diagnostic Codes Detected

KENR9126 73
Troubleshooting Section
(Table 20, cont
d)
CDL Code Description
3rd Party
Device
J1939
Code
Flash
Code
1797-04
Fuel Rail Pressure Sensor voltage below normal
157-04 159
1834-02
Ignition Key Switch loss of signal
-
429
2246-05
Glow Plug Start Aid Relay current below normal
626-05 199
2246-06
Glow Plug Start Aid Relay current above normal
626-06 199
Event Codes
E096-1 High Fuel Pressure - Warning 94-15 164
E113-1 High Transmission Oil Pressure - Warning 127-15 311
E119-1 Low Fuel Level - Warning 096-17
-
E179-1
Alternator Not Charging - Warning
3353-17
-
E194-1 High Exhaust Temperature - Warning 173-15 185
E198-1 Low Fuel Pressure - Warning 94-17 164
E232-1
High Fu
el/Water Separator Water Level - Warning 97-15
-
E268-1
Unexpected Engine Shutdown - Warning
--
E360-1
Low Oil Pressure - Warning
100-17 157
E360-2
Low Oil Pressure - Derate
100-18 157
E361-1
High Engine Coolant Temperature - Warning
110-15 168
E361-2 High Engine Coolant Temperature - Derate 110-16 168
E362-1 Engine Overspeed - Warning 190-15 141
E363-1 High Fuel Temperature - Warning 174-15 165
E396-2 High Fuel Rail Pressure - Warning 157-16 159
E398-2 Low Fuel R ail Pressure - Warning 157-18 159
E539-1 High Intake Manifold Air Temperature - Warning 105-15 133
E539-2 High Intake Manifold Air Temperature - Derate 105-16 133
E877-1 High Transmission Oil Temperature - Warning 177-15 312
E1044-2 High Intake Manifold Air Pressure - Derate 102-16 135
E1045-2 Low Intake Manifold Air Pressure - Derate 102-18 135
E2143-1 Low Engine Coolant Level - Warning 111-17 169
E2143-2
Low Engine Coolant Level - Derate
111-18 169
i03449822
No Diagnostic Codes Detected
Conditions Which Generate This Code:
A flash code 0551 indicates that there are no
detected faults in the system.
System Response:
This code will not appear on the electronic service
tool. The indicator lamps will flash the diagnostic
code. For more information on flash codes, refer to
Troubleshooting, “Indicator Lamps”.
Possible Pe rformance Effect:
None
There are no faults that require troubleshooting.