65
Printing
c. Find the interface shell script for this printer
and copy it to a file with the suffix ‘.orig’. using
the example:
cp hpjet hpjet.orig
d. Copy the Server RCP shell script from the TSSD
support disk to the interface script, e.g:
cp /etc/perle/src/perle.rcp hpjet
Having created the hpjet file set the permissions
to allow execution of the script, e.g:
chmod a+x hpjet
e. Edit the interface script and insert the desired
server name and port number. For example, if the
name is ‘iceland’ and the printer is attached to
port 8 (numbering from 1 to 16). Then the line:
rcp $TMP <server name>:tty<port number>
becomes:
rcp $TMP iceland:tty8
Some Unix systems may require the full
pathname of the ‘RCP’ command. For example:
/usr/ucb/rcp $TMP iceland:tty8
f. Activate the printer for use, e.g:
/usr/lib/accept hpjet enable hpjet
g. Set up the IOLAN+ port for RCP printing by
changing the
Local Port
field in the
Access
section of the
Port Setup Menu
to 514.
To Next Page
Loading...
