Persistent Systems Wave Relay MPU5 User Manual

© 2010 - 2018 Persistent Systems, LLC – All Rights Reserved
67
SOFTWARE SETUP: NETWORK NODE LIST
The Network Node List creates a list of nodes for Network Status and Network Configuration
functions. Those functions will ONLY operate on nodes that are in the Network Node List.
Adding Nodes to the Network Node List
1
Ensure that all your nodes are powered on and that you
have configured their IP addresses and node names.
These will appear in the Other Nodes on Network box.
3
Click All to add all nodes in the box to the Network Node
List. Alternatively, select one or more nodes and click
Selected IPs to add those nodes to the Network Node
List. Hold the shift key or ctrl key while clicking to select
multiple nodes.
4
Nodes can be added manually as well. Enter a comma
separated list of all IP addresses to add in the Manually
Add IP(s) box, then click Add.
2
Click Refresh if all nodes do not appear.

Persistent Systems Wave Relay MPU5 Specifications

General

Brand	Persistent Systems
Model	Wave Relay MPU5
Category	Radio
Language	English