Adjustment
39
600 611 Automatic button clamp opening off ON - OFF OFF
With this function the automatic
opening of the button clamp after
thread trimming can be switched off.
After the machine has been switched
off, the automatic button clamp
opening function is always activated.
612 Test function continuous start ON - OFF OFF
800 The function groups and the functions
Programming the Function Keys P,
P1-P8 and C1-C3 can be released for
manipulation (ON) or locked (OFF). If
a function group is suppressed, its
parameters cannot be changed until a
valid access code has been entered.
Once a valid access code has been
entered, the suppression is cancelled
until the machine is switched off.
801 Right of access function group 000 0N – OFF ON
802 Right of access function group 100 0N – OFF ON
803 Right of access function group 200 0N – OFF ON
807 Right of access function group 600 0N – OFF OFF
808 Right of access function group 700 0N – OFF OFF
809 Right of access function group 800 0N – OFF OFF
810 Right of access to keys "P",
"P1" – "P8" and "C1" – "C3" ON – OFF ON
811 Access code 3371
This parameter is used to alter the
access code. Upon delivery the
machine is set with the access code
"3371".
Group Parameter Description Setting Set value
range
To Next Page
Loading...
Need help?
General
