Pfaff Creative 2134 - Changing the Presser Foot

2:4
Changing the presser foot
Switch off the main switch
Snap off the presser foot
Press the front part of the presser foot upwards and at the same time
the rear part downwards until it disengages from the presser foot
holder (11).
Check that the presser foot is properly attached by raising the presser
foot lift.
Snap on the presser foot
Place the presser foot under the presser foot holder (11), so that when
the presser foot lifter is lowered, the pins of the foot snap onto the
presser foot holder.