5:3
Decorative Sewing
Combined Borders
Create borders of any width by combining different decorative stitches.
Place stabilizer under fabric.
Mark the center of your fabric with a fabric marking pen/pencil. Sew
stitch no. 64; stitch width 6 mm along your line. Next press the mirror
button (50). Position your fabric even with the top of the fi rst row of
stitching. Sew the second row of stitching directly across from the fi rst.
Sew stitch no. 3; stitch length 0.2 mm and stitch no. 56 along each side
of your center embroidery. Your completed border should now have
six rows of decorative stitching.
Tip: Use the edge of your foot as a guide.
Twin needle
Additional decorative effects can be achieved using a twin needle. The
illustration shows how beautiful borders can be created with just a little
imagination!
DO NOT use a twin needle when the warning symbol appears in the
window (see page 4:8). If the warning symbol appears you have to
decrease the stitch width until the symbol disappears. Check whether
the needles can penetrate freely by turning the handwheel.
Note: The twin needle warning is set for a twin needle with 2.0 mm needle
spacing. If you are using a twin needle with a wider spacing than 2.0 mm
you need to always control the stitch width by turning the handwheel and
check whether the needles can penetrate freely.
To Next Page
Loading...
Need help?
General
