Table of content
1
2
3
4
Introduction
Stitch chart  1:8
Parts of the sewing machine  1:13
Parts of the embroidery unit  1:14
Parts of the embroidery hoop  1:14
Carrying case  1:15
Lid 1:15
Accessories   1:16
Preparations
Voltage Switch  2:2
Electrical connection  2:2
Connecting the foot control  2:2
Main switch  2:3
Presser foot lift  2:3
Changing the presser foot  2:4
The IDT (Integrated Dual Feed)  2:5
Lowering the feed dog  2:6
Changing the needle  2:7
Bobbin winding  2:7
Inserting the bobbin and bobbin case  2:11
Threading your creative 2134  2:12
Bringing up the bobbin thread  2:14
Thread cutter  2:14
Threading the twin needle  2:15
Control Panel overview  2:16
Window indications  2:17
Correct thread tension  2:18
Getting started  2:19
Embroidery
Attaching the embroidery foot  3:2
Attach the embroidery unit  3:2
Remove the embroidery unit  3:3
Attach the hoop on the embroidery unit  3:3
Remove the hoop  3:3
Hooping the fabric  3:4
Function buttons for embroidery  3:5
Messages while embroidering  3:11
Get started to embroider  3:14
How to embroider words  3:15
Appliqué embroidery  3:16
Cutwork embroidery  3:16
Sewing
Function buttons for sewing  4:2
Messages while sewing  4:8
Straight stitch  4:9
Three-step Zigzag stitch  – No 4   4:9
Overlock stitches  4:10
Basting stitch - No 14  4:11
Topstitching - No 1  4:11
Stretch triple straight stitch  4:11
Blindhem stitch – No 5  4:12
Elastic blind stitch – No 6  4:12
Buttonholes 4:13
Sewing on buttons – No 0  4:16
Sewing in zippers – No 1  4:17
Darning 4:17
Hoop selection table  1:6