9:10
Embroidery mode - stitch-out
Change thread color
When it is time to change the needle thread, the
machine stops and the upper thread is cut. Change
the spool and re-thread the machine. The next
recommended color is shown in the pop-up.
Cut thread end
After changing the thread, the machine will sew
a few stitches and then stop so you can cut the
thread end.
Embroidery is À nished - clear screen
When the embroidery is À nished, the machine will
ask you if you want to clear the screen. If you touch
OK, the designs will be deleted. Touch cancel to get
back to your design.
To Next Page
Loading...
Need help?
General
