4:8
11 12 13 14
78
10
19
F
G
Sewing mode
Balance (19)
When sewing on special fabrics or doing a special
technique, the balance may need to be adjusted.
Start by sewing a stitch on a piece of scrap fabric.
Touch the balance icon on the option bar to open
the balance window. Balance the stitch, using the
+ and - icons (G). Use the pan icons (F) to see the
whole stitch. Change the picture on the screen to
match your sewn sample. When you sew again, the
balance will be corrected.
Buttonholes can also be balanced.
Stitch settings
Your machine will set the best settings for
each selected stitch. You can make your own
adjustments on the selected stitch.
The setting changes only affect the selected stitch.
Your changed settings will be reset to default when
selecting another stitch. The changed settings
are not automatically saved when turning your
machine off. You can save the adjusted stitch in
Personal menu.
Note: The set stitch width and the stitch length are
shown above the icons. When trying to exceed minimum
or maximum settings for width and length, a warning
sound will be heard.
The default value will be shown in black. A value that
has been changed from the default value is shown in red.
Mirroring (7 and 8)
To mirror stitches or sequences side to side touch
icon (7). For mirroring end to end touch icon (8).
Stitch width (11)
Increase or decrease the stitch width using + and -.
To Next Page
Loading...
Need help?
General
