4:3
3
4
AB C
1a 1b 1c 2a 2b
2c 2d
Sewing mode
Select a stitch
To select a stitch, touch the actual stitch in the
stitch selection area (3). You can scroll through
the list of stitches using the scroll bar on the right
hand side. The number of the actual subcategory is
shown below the scroll bar (4).
You can also select a stitch from the selection
menu.
Sewing recommendations (1)
Shows recommendations for the actual selected
stitch.
a) Presser foot recommendation
b) IDT recommended
c) Stabilizer recommended
Machine settings (2)
Shows your settings for different modes.
a) Set for stitch width safety
b) Set for sensormatic free-motion
c) Set for twin needle
d) Set for spring foot free-motion
Raise and lower the presser foot
Your machine features the automatic presser foot
up and extra lift button and the presser foot down
and pivot button.
To lower the presser foot, place the fabric under
the presser foot and press the presser foot down
button (B) or step on the foot control. To raise the
presser foot, press the presser foot up button (A) or
press the thread snips button (C) to cut needle and
bobbin thread and raise the foot. When the needle
stops in the down position, the presser foot raises
to pivot height.
To Next Page
Loading...
Need help?
General
