2:3
creative 4.0
Preparations
Pack away after sewing
1. Switch the main switch (3) off.
2. Unplug the cord from the wall socket and then
from the machine (2).
3. Unplug the foot control cord from the machine
(1). Wind the foot control cord inside the space
on the underside of the foot control.
4. Place all accessories in the accessory tray. Slide
the tray on to the machine around the free arm.
5. Place the foot control in the space above the
free arm.
6. Put on the hard cover.
LED lights
Your machine has LED lights which distribute the
light evenly over the sewing area and eliminate
shadows.
Free arm
To use the free arm, slide off the accessory tray.
When attached, a hook keeps the accessory tray
locked to the machine. Remove the tray by sliding
it to the left.
Thread cutter
To use the thread cutter, pull the thread from back
to front as shown.
Stylus holder
To keep the stylus in place when not using it, the
stylus holder is provided with a locking feature. To
release the stylus, just bend it slightly towards you.
To Next Page
Loading...
Need help?
General
