15
15a 15b 15c
14
14a 14b
5:4
Sequencing
Option bar
Save options (14)
You can save your sequence to a personal menu
(14a) or to personal À les (14b).
Sequence commands (15)
You can insert tie-offs, stop and thread snips
commands into the sequence. These commands
will be included in the sequence and will always be
performed when sewing it.
Use the tie-off command (15a) if you want a
secure tie-off. You can insert the tie-off commands
anywhere in the sequence.
Note: If creating a sequence in embroidery mode, tie-offs
at the beginning and end will be added automatically,
allowing you to create a sequence in between. The
commands can be removed.
Insert a stop command (15b) if you want the
machine to stop. This is useful for example at the
end of the sequence if you want to sew it only once
or to create a sequence to be stitched in several
rows.
Insert the thread snips command (15c) if you want
the machine to tie-off and cut the threads and raise
the presser foot.
Move the cursor to the position where you want to
add a command. Select it and an icon will be added
into the sequence. This conÀ rms that the command
is inserted and it also shows where the command
will be performed in the sequence.
Note: The commands will appear on the screen in the
order you program them.
To Next Page
Loading...
Need help?
General
