4 Product description
4.1 Product identification
To correctly identify the product when communicating with our service center, always have the informa-
tion from the product rating plate available (see chapter "Labels").
4.1.1 Scope of delivery
●
1 leak detector
●
1 set of documentation (USB stick, operating instructions, simplified memos for the detector and
the RS-232 serial link)
●
1 main power supply cable for Europe (France/Germany) and/or 1 power cable for US
●
2 lifting handles installed on the product
●
1 calibration certificate for the internal calibrated leak
●
1 quality control certificate for the product
●
1 Quality Control label
●
1 funnel (Wet model)
●
1 oil can (Wet model)
●
1 draining connector (Wet model)
●
1 maintenance kit
●
1 DN 25 ISO-KF plastic blanking plate (Integrable model)
●
1 protective cover
●
1 15-pin or 37-pin D-Sub male connector cover (depending on option)
●
1 15-pin or 37-pin D-Sub connector (depending on option)
4.1.2 Variants
The ASM 340 leak detectors are particularly suitable in Industry for vacuum and sniffer leak detection,
in various applications from maintenance to small production applications.
Easy operation, robustness, ultra fast response time, are among the outstanding features of these com-
pact multipurpose units.
●
ASM 340, conventional pumping
Using a 15 m
3
/h rotary vane pump, this detector delivers unmatched performance in a compact
design.
It will be named Wet Model in this manual.
●
ASM 340, dry pumping
Available with diaphragm pump, it is the perfect unit for clean applications where no pollution can
be tolerated.
It will be named Dry Model in this manual.
●
ASM 340, without backing pumping
For greater versatility, it enables the backing pump to be sized according to the need for roughing.
It will be named Integrable Model in this manual.
Product description
18/108
To Next Page
Loading...
