Pfeiffer Vacuum ASM 340 - Table of Contents

Table of contents
1 About this manual 7
1.1 Validity 7
1.1.1 Products concerned 7
1.1.2 Applicable documents 7
1.2 Target group 7
1.3 Conventions 8
1.3.1 Pictographs 8
1.3.2 Instructions in the text 8
1.3.3 Labels 8
1.3.4 Abbreviations 10
2 Safety 11
2.1 General safety information 11
2.1.1 Safety instructions 11
2.1.2 Precautions 12
2.2 Intended use 13
2.3 Foreseeable misuse 13
3 Transportation and Storage 14
3.1 Product receipt 14
3.2 Unpacking/Packing 14
3.3 Handling 16
3.4 Storage 17
4 Product description 18
4.1 Product identification 18
4.1.1 Scope of delivery 18
4.1.2 Variants 18
4.2 Connection interface 19
4.3 Control panel description 20
5 Installation 21
5.1 Detector installation 21
5.2 Storing the lifting handles 21
5.3 Filling with oil from the pump (Wet model) 22
5.4 Purge and inlet vent connection 24
5.4.1 Standard equipment 24
5.4.2 Connection of a neutral gas line (purge) 24
5.5 Connecting the exhaust 25
5.6 Electrical connection 25
5.7 Connecting the part/installation to be tested 26
5.8 Backing pump connection (Integrable model) 26
5.8.1 Backing pump characteristics 26
5.8.2 Connection of the backing pump 27
5.9 Connection of an external oil mist separator 28
6 Commissioning 31
6.1 Detector start-up 31
6.2 Test launched automatically upon start-up 31
6.3 Detector powering off 31
7 Operation 32
7.1 Use conditions 32
7.2 Prerequisites for optimizing use 32
7.3 Operation monitoring 32
7.4 Test Start/Stop 33
7.5 Calibration 34
Table of contents
3/108