Pfeiffer Vacuum ASM 340 - Page 4

7.5.1 Calibration type 34
7.5.2 Calibration in hard vacuum test mode with internal calibrated leak 35
7.5.3 Calibration in hard vacuum test mode with external calibrated leak 36
7.5.4 Calibration in sniffer test with external calibrated leak 37
7.5.5 Calibration in sniffer test on concentration 37
7.6 Zero Function 38
7.7 Touchscreen 38
7.7.1 Navigation 39
7.7.2 Main screen (Home) 40
7.7.3 Graph screen 41
7.7.4 Graph screen: graph parameters 44
7.7.5 Graph screen: recording 45
7.7.6 Graph screen: graph history 45
7.7.7 Graph screen: save and delete 45
7.7.8 Graph screen: display 46
7.7.9 Details of a measurement 48
7.7.10Zoom function 48
7.7.11Function key bar 49
8 Settings menu 53
8.1 Measurement menu 54
8.1.1 Tracer gas 54
8.1.2 Set points 55
8.1.3 Correction factor 57
8.1.4 Calibrated leak settings 59
8.1.5 Target value 60
8.2 Test menu 60
8.2.1 Test method 60
8.2.2 Test mode 61
8.2.3 Type of probe 61
8.2.4 Cycle end 62
8.2.5 Inlet vent 62
8.2.6 Memo Function 63
8.2.7 Zero activation 64
8.2.8 Regeneration 64
8.2.9 Massive Mode 65
8.2.10Calibration check 65
8.2.11Calibration function 66
8.2.12Dynamic calibration 66
8.2.13Purge valve 68
8.2.14Start-up time delay 68
8.2.15Crossover pressures 69
8.3 Configuration menu 69
8.3.1 Unit - Date - Time - Language 70
8.3.2 Sound volume 70
8.3.3 Function keys 71
8.3.4 Screen settings 72
8.3.5 Access - Password 73
8.4 Maintenance menu 75
8.4.1 History 75
8.4.2 Information 77
8.4.3 Last maintenance operations 79
8.4.4 Counters before next maintenance 79
8.4.5 Maintenance turbo pump and cell 80
8.4.6 Burn-in 80
8.4.7 Internal Pirani gauge calibration 81
8.4.8 External gauge 81
8.4.9 Saving/Loading of the detector parameters 82
8.5 File Manager menu 82
Table of contents
4/108