Access: Menu [Maintenance] [Information] [Analyzer cell]
Timer filament 2 Read only
Running time for filament 2
Function to be started
1. Press the running time for filament 2.
2. Press [Reset timer] to reset the timer.
Backing pump information
Access: Menu [Maintenance] [Information] [Backing Pump]
Timer backing pump Press [>] to display the details.
Read only
Running time for backing pump
Status Read only
Pump status
Speed Read only
Pump at set operating speed
Turbomolecular pump information
Access: Menu [Maintenance] [Information] [Turbo pump]
Timer turbo pump Press [>] to display the details.
Read only
Running time for turbomolecular pump
Status Read only
Pump status
Speed Read only
Pump at set operating speed
8.4.3 Last maintenance operations
This function displays the last maintenance operations performed on the detector and recorded by the
service technician.
The message “No maintenance done” is displayed if no maintenance has been recorded.
Reminder: for viewing only in this menu
Access: Menu [Maintenance] [Last maintenance operations]
Date Date of the maintenance work
Inspector name Maintenance technician who performed the work
Number total hours Number of hours of detector operation at the time of maintenance
Comments Comment entered by the service technician
8.4.4 Counters before next maintenance
This function displays the remaining periods before the next maintenance.
Reminder: for viewing only in this menu
Access: Menu [Maintenance] [Counters before next maintenance]
Valves Number of cycles completed versus number of cycles before next maintenance
Backing pump Number of hours of backing pump operation versus the number of hours before the next maintenance
Turbo pump Number of hours of turbomolecular pump operation versus the number of hours before the next mainte-
nance
Settings menu
79/108
To Next Page
Loading...
