Need help?Do you have a question about the Pfeiffer Vacuum ASM 310 and is the answer not in the manual?
General| Detectable Gases | Helium |
|---|---|
| Minimum Detectable Leak Rate | 5 x 10^-12 mbar l/s |
| Supply voltage | 100 - 240 V, 50/60 Hz |
| Output Signal | Analog |
| Power Supply | 100 - 240 V, 50/60 Hz |
| Operating Temperature | 10 to 40 °C |
Document's applicability and product version.
Manual's intended audience.
Symbols and text conventions used.
Symbols indicating useful information.
How instructions are presented in the text.
Explanation of product labels and their meanings.
List of abbreviations used in the manual.
Overview of risk levels and safety information.
Specific safety instructions based on risk assessment.
Essential precautions for safe operation.
Specifies the intended purpose of the leak detector.
Lists uses considered as misuse of the product.
Procedures for receiving and inspecting the product.
Instructions for safely unpacking and packing.
Guidelines for safe handling of the detector.
Recommendations for transporting the leak detector.
Procedures for storing the detector properly.
Information for identifying the product.
List of items included in the product package.
Description of the detector's connection ports.
Detailed description of the control panel components.
Steps for installing the leak detector.
Connecting purge and inlet vent systems.
Details on standard equipment for connections.
How to connect a neutral gas line for purging.
How to connect the exhaust port.
Steps for making the electrical connection.
Connecting the unit under test.
Procedures for starting up the detector.
Steps for safely powering off the detector.
Environmental and usage requirements.
Steps before use for optimal performance.
How to monitor the detector's operation status.
How to start and stop leak detection tests.
Process for calibrating the leak detector.
Selecting the type of calibration to perform.
Calibrating with the internal leak.
Calibrating with an external leak.
Calibrating sniffer test with external leak.
Calibrating sniffer test based on gas concentration.
Function to identify small leak rate variations.
Interaction and functions of the touchscreen interface.
Symbols and methods for navigating the interface.
Description of the main operating screen.
Overview of the graph screen for monitoring.
Settings for customizing graph display.
Storing measurement data in the control panel memory.
Automatic recording of leak rate and pressure history.
Procedures for saving and deleting recorded data.
Viewing detailed data points of a measurement.
Function to zoom in on the display.
Description of the function key bar and its usage.
Settings for measurement parameters.
Selecting the tracer gas for detection.
Defining various set points for tests.
Adjusting for tracer gas concentration.
Configuring settings for calibrated leaks.
Setting the target leak value.
Access to test-related settings.
Selecting the appropriate test method.
Setting the test mode within a method.
Selecting the sniffer probe type.
Automatic roughing and test timer check.
Configuring the inlet vent function.
Freezing the screen at the end of a test.
Activating zero function for small leak detection.
Cleaning tracer gas from the detector.
Performing tests on very large leaks.
Fast check of detector calibration.
Checking detector adjustment and leak rate.
Setting a delay before detector use.
Access to system configuration settings.
Configuring display units, date, time, and language.
Setting audio alarms and voice prompts.
Enabling and assigning function keys.
Adjusting screen brightness and paging.
Managing user access levels and passwords.
Access to maintenance logs and settings.
Viewing event and calibration histories.
Viewing general detector information.
Records of past maintenance activities.
Tracking intervals until next maintenance.
Maintenance procedures for pumps and cell.
Preparing the detector for optimal operation.
Calibrating the internal Pirani gauge.
Backing up and restoring detector settings.
Managing saved files on internal memory or USB.
Access to advanced settings for expert users.
Configuring serial communication interfaces.
Access to service functions, reserved for centers.
General technical specifications and standards.
Detailed technical specifications of the ASM 310.
Default settings for the configuration menus.
Details on the 15-pin I/O interface.
Information on interface cable specifications.
General interface information.
Saving I/O configuration.
Setting analog outputs.
Formulas for analog output calculations.
Details on the RS-232 serial communication link.
To Next Page
