Pfeiffer Vacuum ASM 310 - Product description; Product identification; Scope of delivery; Connection interface

4 Product description
4.1 Product identification
To correctly identify the product when communicating with our service center, always have the informa-
tion from the product rating plate available (see chapter "Labels").
4.1.1 Scope of delivery
●
1 leak detector
●
1 set of documentation (USB stick, operating instructions, simplified memos for the detector and
the RS-232 serial link)
●
1 main power supply cable for Europe (France/Germany) and/or 1 power cable for US
●
1 calibration certificate for the internal calibrated leak
●
1 quality control certificate for the product
●
1 Quality Control label
●
1 maintenance kit
●
1 15-pin male D-Sub connector cover
●
1 15-pin D-Sub connector
4.2 Connection interface
5
6 - 7
8
9
10
1112
1
2
4
3
1 Detector inlet port (inlet) 7 Inlet vent connector (do not obstruct) (VENT/N2
PURGE)
1)
2 Connector for USB stick (at the user’s
expense)
8 Exhaust for primary pump with filter (EXHAUST)
3 Control panel 9 Power supply
4
RC 10 remote control connector
1)
10 Main switch/Circuit breaker (I/O)
5 Standard sniffer probe connector
(SNIFFER)
1)
11 RS-232 9-pin D-Sub communication interface con-
nector
(INPUTS/OUTPUTS)
1)
6 Purge inlet connector (neutral gas)
(VENT/N2 PURGE)
1)
12 15-pin D-Sub I/O communication interface connec-
tor
(INPUTS/OUTPUTS)
1)
1) Accessory (at the customer's expense)
Product description
18/98