1 About this manual
IMPORTANT
Read carefully before use.
Keep the manual for future consultation.
1.1 Validity
This operating instructions is a customer document of Pfeiffer Vacuum. The operating instructions de-
scribe the functions of the named product and provide the most important information for the safe use of
the device. The description is written in accordance with the valid directives. The information in this op-
erating instructions refers to the product's current development status. The document shall remain valid
provided that the customer does not make any changes to the product.
1.1.1 Products concerned
This document applies to products with the following part numbers:
Part Number Description
BSAA0200MM9A ASM 310
1.1.2 Applicable documents
Document Part Number
Maintenance instructions - ASM 310
128864M
1)
Operating instructions - Communication interface for leak detectors
130417
1)
Operating instructions - Standard sniffer probe
121780
1)
Operating instructions - Spray gun
121781
1)
Operating instructions - RC 10 remote control
124628
1)
EC Declaration of conformity Included with these instructions
1) also available at www.pfeiffer-vacuum.com
1.2 Target group
This user manual is intended for all persons in charge of transport, installation, commissioning/decom-
missioning, use, maintenance or storage of the product.
The work described in this document must only be carried out by persons with suitable technical training
(specialized staff) or persons who have undergone Pfeiffer Vacuum training.
1.3 Conventions
1.3.1 Pictographs
Pictographs used in the document indicate useful information.
Note
Tip
Check a key point on the graphic.
Apply the stated tightening torque.
About this manual
7/98
To Next Page
Loading...
