3 Transportation and Storage
3.1 Product receipt
Condition of the delivery
●
Check that the product has not been damaged during transport.
●
If the product is damaged, take the necessary measures with the carrier and notify the
manufacturer.
►
Keep the product in its original packaging so it stays as clean as it was when dispatched by us:
only unpack the product once it has arrived at the location where it will be used.
►
Keep the blank-off flange on the inlet port (inlet) when the product is not in use.
Keep the packaging (recyclable materials) in case the product needs to be transported or
stored.
3.2 Unpacking/Packing
CAUTION
Risk of crushing related to product tilting
Although the product fully complies with EU safety regulations, there is a risk of tilting when the prod-
uct is not correctly installed or used.
►
Place the product on a flat, hard floor.
►
Keep the product on its 4 feet.
Unpacking
►
Use a lifting device suitable for the product's weight to lift the product.
►
Use a 3-strand strap with the following characteristics:
–
Length for each strand: > 500 mm
–
Load per strand: > 100 kg
Transportation and Storage
13/98
To Next Page
Loading...
