Pfeiffer TPG 261 - Save parameters to EEPROM

84
BG 5195 BEN / A (2011-05) TPG261.oi
Transmit: SAV [,x] <CR>[<LF>]
│
└─ x = 0 –> Save default
parameters
1 –> Save user parameters
Receive: <ACK><CR><LF>
Transmit: DIC [,x] <CR>[<LF>]
│
└─ Measurement display behavior
when a Pirani gauge or a Pirani
Capacitance gauge is combined
with a linear gauge with
1000 mbar F.S., x =
0 –>manual (default)
1 –>automatic
Receive: <ACK><CR><LF>
Transmit: <ENQ>
Receive: x <CR><LF>
│
└─ Measurement display behavior
(For service personnel)
Transmit: PNR <CR>[<LF>]
Receive: <ACK><CR><LF>
Transmit: <ENQ>
Receive: 302-510-x <CR><LF>
│ │
│ └─ -x = Modification index
│ (-- = original version)
│
└─ Firmware number
Save parameters to
EEPROM
Display changeover
5.2.2.5 Test Parameters
Firmware version