Pfeiffer TPG 261 - 7 Troubleshooting; Signalization of errors; Error messages

92
BG 5195 BEN / A (2011-05) TPG261.oi
7 Troubleshooting
and the error relay opens (→  21).
Possible cause and remedy/
acknowledgement
Interruption or instability in sensor line
or connector (Sensor error).
Ö Acknowledge with the
. key
If the problem persists,
or
is displayed.
Possible cause and remedy/
acknowledgement
The TPG 261 has been turned on too
fast after power off.
Ö Acknowledge with the
key.
If the watchdog is set to
,
the TPG 261 acknowledges the
message automatically after 2 s
(→  58).
The watchdog has tripped because of a
severe electric disturbance or an oper-
ating system error.
Ö Acknowledge with the
key.
If the watchdog is set to
,
the TPG 261 acknowledges the
message automatically after 2 s
(→  58).
Possible cause and remedy/
acknowledgement
Main memory (RAM) error.
Ö Acknowledge with the
key.
Possible cause and remedy/
acknowledgement
Program memory (EPROM) error.
Ö Acknowledge with the
key.
Signalization of errors
Error messages