Revision: 3.0.3
System Lock
Lock the instrument,
Once the system is locked, any
modification to the system is prohibited, but the
parameter is readable. "Unlock" using your
password. The password is composed of 6
Current Loop Mode Select
0. 4-20mA
1. 0-20mA
2. 4-20mA vs.Vel.
3. 4-20mA vs.Energy
Other different current output characteristics are displayed in
according to his actual requirements.
In two graphs shown above, flow F
4mA
indicates the value that the user
entered in Window M58. In the 4
a positive or negative flow value as long
as the two values are not the same.
CL 4mA Output Value
Set the CL output value according to the flow value
at 4mA. The flow unit’s options are
those in Window m31. Once "4-
selected in Window M56, th
m/s.
Menu 4 7
Menu 5 5
Menu 5 6
D116
Series Ultrasonic Flowmeter
Once the system is locked, any
modification to the system is prohibited, but the
-20mA output to. be flow rate mode
output range to be 0-20mA mode
-20mA output to. be velocity mode
current loop output 4-
Other different current output characteristics are displayed in
below
figures. The user can select one of them
the
user entered in Window M57; and flow F
entered in Window M58. In the 4
-20mA modes, F
4mA
and F
20mA
as the two values are not the same.
Set the CL output value according to the flow value
same as
." is
0. 4 -
0
Series Ultrasonic Flowmeter
Page 30 of 53
figures. The user can select one of them
user entered in Window M57; and flow F
20mA