NEWVSI TECHNICAL MANUAL - OPERATION PG DRIVES TECHNOLOGY
18 SK80151-1
Programming should only be conducted by healthcare professionals with in-depth knowledge of
PGDT electronic controllers. Incorrect programming could result in an unsafe set-up of a
wheelchair for a user. PGDT accepts no liability for losses of any kind if the programming of the
controller is altered from factory pre-set values.
12 Joystick Knobs
The knob fitted to your joystick is suitable for most applications. If you would prefer another type, there are a range of alternatives
available. Please contact your wheelchair distributor or manufacturer for advice. Do not replace the joystick knob with any
unauthorized item - it may cause hazardous operation.
Do not replace the joystick knob with any unauthorized item It may cause hazardous operation.
PGDT accepts no liability for losses of any kind arising from failure to comply with this condition.
13 Servicing
All repairs and servicing must be carried out by authorized service personnel. Opening or making any unauthorized adjustments
or modifications to the controller or its components will invalidate any warranty and may result in hazards to yourself or other
people, and is strictly forbidden.
PGDT accept no liability for losses of any kind arising from unauthorized opening, adjustment or
modifications to the newVSI controller.
If the controller is damaged in any way, or if internal damage may have occurred through impact
or dropping, have the product checked by qualified personnel before operating. PGDT accepts no
liability for losses of any kind arising from failure to comply with this condition.
14 Warranty
The newVSI controller is covered by a warranty period defined by the wheelchair manufacturer. For details of the warranty period,
please contact your service agent.
The warranty will be void if the newVSI controller has:
• Not been used in accordance with the newVSI controller Technical Manual, SK80151.
• Been subject to misuse or abuse.
• Been modified or repaired by non-authorized persons.
The warranty will be void if the newVSI has not been used in accordance with newVSI Technical
Manual SK80151, the newVSI has been subject to misuse or abuse, or if the newVSI has been
modified or repaired by unauthorized persons.
To Next Page
Loading...