NEWVSI TECHNICAL MANUAL PG DRIVES TECHNOLOGY
6 SK80151-1
About this manual
This manual is divided into 6 chapters.
Chapter 1 – Operation
This chapter covers the newVSI operating instructions.
Chapter 2 – Installation
This chapter covers the newVSI mounting, connection and wiring.
Chapter 3 – Programming
This chapter provides detailed information on the newVSI programmable parameters.
Chapter 4 – Diagnostics
This chapter summarizes the diagnostic procedure.
Chapter 5 – Warning Summary
This chapter summarizes the warnings shown throughout the manual.
Chapter 6 – Specifications
This chapter documents the newVSI technical specifications.
Icons
Throughout this manual, icons are used to draw the reader’s attention.
The icons used are:
Note – A general point for best practice.
Caution – A point of safety, which if ignored, could result in damage to the controller or the
vehicle.
Warning – A point of safety, which if ignored, could cause injury to the individual.
PG Drives Technology accepts no liability for any losses of any kind if these points are not followed.
To Next Page
Loading...