9
LABELS ON UNIT
<Labels applied to the unit>
To avoid accidents, users are advised to read carefully the hazard labels found at key locations on the
interior and exterior of the unit.
Possible
Danger
Warning/Caution Type
Location of Danger
Warning/Caution Label Description of Danger
Personal
injury
Electric shock
Inside the cover for
space for a temperature
recorder
This is a power supply
connection joint for the
temperature recorder.
Do not touch the power supply
joint to avoid the electric
shock.
Personal
injury
Electric shock
Inside the cover on the
top
Do not remove the cover to
avoid the electric shock.
Personal
injury
Sample
damage
Frostbite
Rise in chamber
temperature
Interior
To prevent frostbite, wear
protective gloves when
handling frozen items in the
chamber.
Too much frost may cause
chamber temperature rise
resulting from incomplete door
close.
Sample
damage
Rise in chamber
temperature
Interior
The camber temperature may
rise may be caused if the door
comes in contact with a
storage container or the door
does not close well.
Sample
damage
Rise in chamber
temperature
Interior
Do not use tool with a sharp
edge (such as a knife or
screw-driver) to remove the
frost as this may cause
damage to the freezer which
could lead to failure.
To Next Page
Loading...
