Philips 150B6CB/00 - Display Disturbances from External Environment; Display Disturbances to External Environment; Emi; Mean Time between Failures

170B6 LCD
87
Go to cover page
15
20
GENERAL PRODUCT SPECIFICATION(Continued)
6.2 Transportati on tests
StandardPhilips UAN-D1400 NSTA
Height 76.0 cm 76.0 cm
1corner 1 corner
Drop Sequence 3 edges 3 edges
Test (Room temp) 6 faces (Room temp) 6 faces
Electrical function ok
Test Mechanical function ok
Result Noserious damage on set appearance
(Room temp 20°C~23°C, humidity 40%~65%)
(1)PACKAGING
Sequence 5~500 Hz, 0.73 Grms,Truck spectrum30min
(2) OPERATING
Vibration 10-55-10, 0.35 mm amplitude, 30 min./axis. 3axes
Test Test Electrical function ok
Result Mechanical function ok
Noserious damage on set appearance
6.3 Display disturbances from external environment
AccordingtoIEC 801-2 for ESD disturbances
6.4 Display disturbances to external environment
6.4.1 EMI
EMI: FCC, VCCI,CE,C-Tick, MPRIII,BCIQ, IC, BSMI,*IEC60601-1-2 (EU)
*Medical compliance only applies for dedicated models.
7.0
Reliability
7.1. MeanTime BetweenFailures
System MTBF(Excluding the LCD panel and CCFL): 50,000 hrs
CCFLMTBF: 30,000 hrs (50% of original brightness)
8.0 Quality assurance requirements
8.1 Acceptance test
AccordingtoMIL-STD-105D Control II level
AQL: 0.65 (major)
2.50 (minor)
(Please also refer to annual quality agreemen
t)
Customer acceptance criteria: UAW0377/00
9.0 Serviceability
The serviceability of thismonitor should fulfill the requirements, which are prescribedin
UAW-0346 and must be checked with the checklist UAT-0361.
BRAND:PHILIPS
17 inch LCD Monitor
TYPE :170B6CG/00
8639 000 16159
2004-12-24
2004-12-24
590
Peter V.