Philips DPM8000 - Power Supply and Charging

DPM 8000 series - Technical Specification and Advanced Device Configuration Page 19
1.17. Power Supply and charging
Battery type: Philips rechargeable Li-ion battery ACC8100
Battery Voltage: 3,7V
Battery Capacity: 1000mAh
Battery lifetime: up to 23 hours of recording (DSS Pro mode)
up to 200 hours standby
Charging time: 3 hours (Full Charging)
Options to charge the DPM through the docking station?
Insert the micro USB plug of
the cable into the Docking
station’s 5V DC Power
supply port
Insert the other end of the cable into the any USB power adapter or simply to your computer’s USB port.
Blackberry power adapter
iPhone power adapter
Computer/Netbook/Tablet
with powered USB port