Philips DVR2008 - Recording from External Sources

28 EN
Record from other devices
Record from an external device
(Analogue camcorder/ Satellite receiver/
VCR/ DVD Player)
You can record from the external device to
this recorder. Copy-protected material
cannot be recorded on this recorder.
1 Turn on the TV to the correct viewing
channel for the recorder.
2 Connect the external device (e.g.
analogue camcorder, VCR, DVD player)
to this recorder.
3 Press 信号源 to select the video
source.
[ CVBS ] : the device connected to
the CVBS INPUT (CVBS and
AUDIO L/R) sockets on the recorder.
[ YPbPr ] : the device connected to
the Y Pb Pr INPUT (YPbPr and
AUDIO L/R) sockets on the recorder.
4 Start play on the connected device and
locate the content to record.
5 Press z at the point you want to start
recording.
To add recording time, press z
repeatedly to extend the recording
time.
To pause recording, press u.
To continue recording, press u
again.
6 To stop recording, press x.
A new title is saved.
7 To exit, press 信号源.
•
•
•
•
•

Simultaneous record and
play
Play the programme during
recording
1 Press 录像清单.
2 Select the title marked [ Recording... ],
then press u.
Play another recording or media fi le
during recording
Play from HDD
1 Press 录像清单.
2 Select a title to play, then press u.
Playback from USB
1 Insert the USB device to the USB
socket.
A message is displayed. Select
[ Confi rm ] to view the USB contents
menu.
If the USB is already connected, press
USB to access the content menu.
2 Select a fi le to play, then press u.
Watch other TV programme
1 Use the TV remote control to select a
TV channel.
2 To view play from the recorder, switch
the TV back to its correct viewing
channel for recorder.

•
1_DVR2008-93_eng_wk822.indd 281_DVR2008-93_eng_wk822.indd 28 2008-05-26 10:53:16 AM2008-05-26 10:53:16 AM