Philips DVR2008 - File Management and System Reset

50 EN
Format fi les
This option removes all recordings and media
fi les on the recorder or a USB fl ash drive
1 Press 主选单.
2 Press [ Settings ], then press OK.
3 Press X repeatedly to select [ System ].
4 Press T to select [ Format ], then press
OK.
5 Select an option and press OK.
[ Recordings ]
Removes recorded titles on the recorder.
[ Media Files ]
Removes all media fi les (MP3, WMA,
jpeg and DivX fi les) on the recorder.
[ USB ]
Removes all fi les on the USB fl ash drive.
6 To go to Home menu, press 主选单.
Restore default settings
Reset the recorder to factory default settings.
Note
After the reset, the initial setup is required. See
chapter ‘Get Started - First time settings’. All
previous settings are reset.
•
1 Press 主选单.
2 Press [ Settings ], then press OK.
3 Press X repeatedly to select [ System ].
4 Press T to select [ Restore Default ],
then press OK.
A confi rmation message is displayed.
5 Select [ OK ] and press OK.
6 To go to Home menu, press 主选单.

1_DVR2008-93_eng_wk822.indd 501_DVR2008-93_eng_wk822.indd 50 2008-05-26 10:53:21 AM2008-05-26 10:53:21 AM