54 EN
11 Troubleshooting
Warning!
Risk of electric shock. Never remove the casing of
this recorder.
•
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this recorder, check the following
points before requesting service. If the problem remains unsolved,
register your product and get support at www.philips.com/welcome.
Main Unit
No power.
Press 2 (Standby-On) button on the front of the
recorder to turn on the system.
Ensure that the AC outlet has power.
•
•
Remote control does not
work.
Aim the remote control directly at the sensor on the front
of the recorder (not towards TV).
Remove any obstacles between the recorder and the
remote control.
Batteries are weak. Replace the batteries.
•
•
•
No TV signal is received. Check the connection to the antenna or cable TV signal.
Manually tune and store the TV channel. See chapter
‘Adjust Settings – Manage preset channels’.
•
•
1_DVR2008-93_eng_wk822.indd 541_DVR2008-93_eng_wk822.indd 54 2008-05-26 10:53:22 AM2008-05-26 10:53:22 AM
To Next Page
Loading...
