Philips DVR2008 - Change Password

EN 49
English
Adjust Settings
Change password
Change the password for child lock. This four
digit password may be required when you are
playing prohibited content.
1 Press 主选单.
2 Press [ Settings ], then press OK.
3 Press X repeatedly to select [ System ].
4 Press T to select [ Change Password ],
then press OK.
Clock
Night Mode
Child Lock
Change Password
Firmware Upgrade
HDD Information
Format
Restore Default
Input Password
_ _ _ _
Input New Password
_ _ _ _
Confirm New Password
_ _ _ _
System Language Tuner Video Recording
5 Enter the existing four digit password.
If you are entering the password for
the fi rst time or if you forget the
password, the default password is
‘0808’.
6 Enter the new four digit pin code.
7 Enter the same four digit pin code again,
then press OK.
8 Select [ OK ] and press OK.
9 To go to Home menu, press 主选单.
•
View fi rmware information
Display information on the hard disk space.
1 Press 主选单.
2 Press [ Settings ], then press OK.
3 Press X repeatedly to select [ System ].
The current version of the fi rmware
of this recorder is displayed.
4 To go to Home menu, press 主选单.
View hard disk information
Display information on the hard disk space.
1 Press 主选单.
2 Press [ Settings ], then press OK.
3 Press X repeatedly to select [ System ].
4 Press T to select [ HDD Information ],
then press OK.
Information on available space for
recording is displayed.
5 To exit, select [ OK ] and press OK.
6 To go to Home menu, press 主选单.


1_DVR2008-93_eng_wk822.indd 491_DVR2008-93_eng_wk822.indd 49 2008-05-26 10:53:21 AM2008-05-26 10:53:21 AM