Philips EasyKey DDL702E - Extended Functions; System Query

14
Extended functions
System query
Enter [#] and enter master PIN code,
then conrm with [#].
Enter [5] to go into extended functions.
Enter [1] to join a network. Enter [2]
to exit a network. Before entering
into the extended function settings,
please download and open the Philips
EasyKey APP on your mobile phone.
Enter [6] to go into system query, then
enter [1] to check the security code
and the system will automatically
broadcast the product series number.
Enter [#] and enter master PIN code,
then conrm with [#].
Security code query
or
Extended functions are applicable to
Wi-Fi enabled product. Please follow
the below instructions to connect to
Wi-Fi network.
Attention
Directly enter 400# to go into system
query.
Attention
Enter [#] and the master PIN code, then
conrm with [#].
Locking mode settings
Enter [4] to go to system settings, then
enter [4] to go to locking mode setting.
or
Press [1] for auto mode, press [2] for
manual mode.After hearing a voice
prompt of “Succeeded", press [*] until
you exit master mode.