Philips EasyKey DDL702E - App Binding Instruction

15
Local query
Enter [#] and enter master PIN code,
then conrm with [#].
Enter [6] to go into system query, and
enter [2] to check the software version,
then the system will broadcast it
automatically.
Directly enter 114# to go into the local
query.
Attention
App binding instruction
Download the App
Lock pairing
Due to the functions vary in dierent
models, please consult the ocial
authorized seller to conrm whether
the product(s) you purchased
support(s) networking.
The door locks only support
connecting to the 2.4Ghz Wi-Fi router
(5Ghz Wi-Fi is not supported). Please
make sure that the visual distance
between the router and the door
lock terminal is less than 10 meters,
otherwise, the signal might be poor.
Please scan the QR code above to
download the App and install it.
Make sure the door lock terminal
has been installed with batteries
or connected to the power supply.
Make sure the door lock terminal
has been installed with batteries
or connected to the power supply.
Sign in to the App, click to “Add
a device” on the Homepage,
choose [Bluetooth Smart Door
Lock] to enter the pairing page,
then complete the pairing process
according to the App prompts.
Click the [#] on the smart door
lock terminal and enter the
master PIN code, re-click the
[#] to enter master mode, press
[5], then press[1] to enter the
Networking Distribution Mode,
then you will hear a voice prompt
of “Connecting, please wait a
moment”.
Sign in to the App, click to “Add a
device” on the Homepage, choose
[Wi-Fi lock/Facial recognition
lock/Video lock] to enter the
pairing page, then complete the
pairing process according to the
App prompts.
①
①
②
②
③
1. For Bluetooth smart door lock(s)
2. For Wi-Fi smart door lock(s), facial
recognition smart door lock(s) and
video smart door lock(s)
Attention
Attention