EasyManua.ls Logo

Philips EasyKey DDL702E - Mechanical Key Operation

Philips EasyKey DDL702E
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
Inside deadlock
When the door lock is locked, long press the
[CLOSE] button and there will be a voice
prompt of "inside deadlock enabled".
When the door is under inside deadlock
mode, the outside escutcheon will lock up. If
you try to wake up the system manually, the
keypad area will display the combination of
15937(X)” and there will be a voice prompt of
“Inside deadlock enabled" to remind you that
the door has been deadlocked from inside.
Under deadlock mode, all operations of the
outside escutcheon are disabled. Master PIN
code verication or mechanical key opening
is required to release the door from deadlock
mode.
Unlock with mechanical key
① Cut the mechanical
box and take out the
key. Push the cover
aside and reveal the key.
② Insert the key into
the keyhole and the key
should be vertical to the
key shell. Then turn the
key shell by 90° in the
direction of the handle
until it is close to the
lock.
③ Make a 180 degrees
twist clockwise and
make sure the key
shell is parallel to the
horizontal plane. Then
rotate the key cover
horizontally in the
direction of the handle
to unlock.
Attention
Push button
Lock from outside or inside
The latch bolt will pop up automatically as soon as the door is close and there will be a voice
prompt of “Door Close”.

Related product manuals