Philips NeoPix Easy 2+ - Changing Projector Settings; Picture and Sound Adjustments

14 Philips · NeoPix Easy 2
+
6 Change settings
This section helps you change the settings
of the projector.
Picture settings
1 Press .
2 Select SETUP, and then press OK to access
the setting options.
3 Select a picture option, and then press /
to change:
• Picture Mode: Select pre-defined color
settings for picture or video display.
Select User to customize the following
settings:
• Contrast: Set color contrast.
• Brightness: Set color brightness.
• Color: Set color saturation.
• Sharpness: Set image sharpness.
• Keystone Correction: Correct keystone
or distorted images to be rectangular or
square.
• Digital Zoom: Enlarge or reduce the size
of the image projected.
• Color Temperature: Set different color
temperature.
• Aspect Ratio: Set a screen ratio.
• Noise Reduction: Set a noise reduction
level.
Sound settings
1 Press .
2 Select SETUP, and then press OK to access
the setting options.
3 Select a sound option, and then press /
to change:
• Sound Mode: Select pre-defined sound
settings for your video or music. Select
User to customize the following settings:
• Treble: Set a treble level.
• Bass: Set a bass level.
• Balance: Adjust balance levels to
experience the original sound of your
movie and music.
• Auto Volume: Set auto volume on to
reduce sudden changes in volume.
• Surround Sound: Turn surround on or
off.
Language settings
1 Press .
2 Select SETUP, and then press OK to access
the setting options.
3 Select OSD Language, and then press /
on the remote control to select your desired
language for on-screen menu.
Restore default settings
1 Press .
2 Select SETUP, and then press OK to access
the setting options.
3 Select Restore Factory Default, and then
press OK�
4 Follow the on-screen instructions to start or
cancel resetting.
Rotate/flip projection
screen
1 Press .
2 Select SETUP, and then press OK to access
the setting options.
3 Select Panel Flip Rotate, and then press
/ to rotate or flip the projection screen.
Set sleep timer
Set a period of time after which the projector
turns off automatically.
1 Press .
2 Select SETUP, and then press OK to access
the setting options.
3 Select Sleep Timer, and then press / to
select a period of time (in minute).
Set auto sleep
Set a time length so that the projector turns off
automatically after a period of time of inactivity.
1 Press .
2 Select SETUP, and then press OK to access
the setting options.
3 Select Auto Sleep, and then press / to
select a period of time (in hour).
All manuals and user guides at all-guidesbox.com