Philips User manual - Switch on and off the Appliance

12
EN
» The air quality light shows the current
air quality.
» The CURRENT HUMIDITY light
shows the current humidity level.
3 Press the button to switch off the
appliance.
Note
• Humidier cannot be used alone without air
purier operating.
• If the water bucket is empty, the humidier is
switched off, but the air purier still operates. In
this way the appliance operates as an air purier
only (PURIFIER light and REFILL WATER light
are on).
Note
• The appliance is locked after the lter light
ashing for approximately 2 weeks.
• Approximately one day before the appliance
locks, it beeps every 30 minutes to inform you
that the lter needs to be replaced.
Switch on and off the
appliance
The appliance always operates under air
purication combined with humidication.
If you want to operate the appliance only as an
air purier, you need to empty the water in the
water bucket.
1 Plug the appliance into the power supply.
» All lights go on twice and you hear a
beep. Then, the lights go out again.
2 Press the button to switch on the
appliance.
» The PURIFIER and HUMIDIFIER lights
are on.