Philips User manual - Prepare for Humidification

9
EN
English
Prepare for humidication
1
Pull the water bucket from the side of the
appliance.
2 Pull the humidication lter tray from the
appliance.
3 Remove the packaging material from the
humidication lter.
6 Silde the Multi-care lter into the pre-lter.
7 Place the pre-lter in the appliance.
4
1
2
Note
• Make sure that the side with the two clips is
pointing towards you, and that all hooks of the
pre-lter are properly attached to the purier.
8 To reattach the front panel, mount the
panel onto the top of the appliance rst
(1). Then, gently place the panel against the
body of the appliance (2).
4
2
1