EasyManua.ls Logo

Philips User manual - Replace Activated Carbon and HEPA Filters

Philips User manual
188 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27EN
English
1 Switch off the appliance and unplug it.
2 Place your ngers in the recesses of the
side panels.
3 Gently pull the bottom of the panel out
(1), then lift the top part of the front panel
towards you (2).
4
2
1
4 Remove all lters from the appliance.
4
3
5 Take the used lters by both sides and
gently deposit them into the house hold
trash bin.
Replace the activated carbon
lter and the HEPA lter
Note
The activated carbon and the HEPA lters are
not washable nor vacuum cleanable.
Replace both the activated carbon lter and the
HEPA lter when the lter light
ashes.
Tip
When you remove or insert lters, place the
appliance against a wall for more stability.
Note
Insert the lters in the correct position.
Make sure that you place the lters in the order
of HEPA lter, activated carbon lter, Multi-care
lter, and nally the pre-lter.
Make sure that the side with the tag is pointing
towards you.

Table of Contents

Related product manuals