Philips User manual - Page 26

26
EN
8 Slide the new Multi-care lter into the pre-
lter.
9 Place the ler back in the appliance.
4
1
2
Note
• Make sure that the side with two clips is pointing
towards you, and that all hooks of the pre-lter
are properly attached to the appliance.
10 To reattach the front panel, mount the
panel onto the top of the appliance rst
(1). Then, gently place the panel against the
body of the appliance (2).
4
2
1
11 Reset the Multi-care lter lifetime (see the
chapter ‘Reset the lter lifetime counter’).
5 Remove the Multi-care lter from the pre-
lter.
6 Take the used lter by both sides and
gently deposit them into the house hold
trash bin.
Note
• Do not touch the pleated lter surface, or smell
the lter as it has collected pollutants from the
air.
• Wash your hands after disposing of the used
lters.
7 Remove all packaging material from the
new Multi-care lter.