Philips VL440 - Operational

TECHNICAL SPECIFICATIONS
B
02.9687.0001 C 31 October 2013 95
NOTE: Philips Vari-Lite reserves the right to change details of design, materials and finishes. Specifications are
subject to change without notice. Philips VARI
❋LITE automated lighting equipment is made in the U.S.A.
Operational
Power Requirements
• VL440 Spot: Standard AC power distribution from 100 - 240VAC, 50/60 Hz. The unit requires up to
6.6A (at 100V) depending on the AC supply voltage.*
• VL770 Spot: Standard AC power distribution from 100 - 240VAC, 50/60 Hz. The unit requires up to
10.2A (at 100V) depending on the AC supply voltage.*
• VL880 Spot: Standard AC power distribution from 100 - 240VAC, 50/60 Hz. The unit requires up to
12.0A (at 100V) depending on the AC supply voltage.*
Note: *For a breakdown of total luminaire current draw at different voltages for all models covered in
this manual, see “Current vs. Voltage” on page 14.
Operational Temperature
-20° to 122°F (-29° to 50°C)
Cooling
Forced-air cooling.
Control
Control by DMX512 protocol. Compatible with a wide variety of DMX512 consoles.
DMX Channels
30 channels.
Mounting Position
The luminaire can be mounted and operated in any orientation.