Philips VL440 - Page 66

VARI❋LITE - VL440 / VL770 / VL880 LUMINAIRE USER’S MANUAL
48 31 October 2013 02.9687.0001 C
Note: Avoid changing timing channel values in a fading cue. This can cause unexpected behavior in
the luminaire as the timing channel value is updated over time. Timing channel values and the final
destination of the parameters affected by the timing channel should always be sent in a zero count.
Timing channels can be set in either % or 0-255 (DMX) modes, with the following values assigned:
Table 9: Timing Channels Map
DMX % Value = Seconds
0 Full Speed
10.2
20.4
310.6
40.8
521
61.2
71.4
831.6
91.8
10 4 2
11 2.2
12 2.4
13 5 2.6
14 2.8
15 6 3
16 3.2
17 3.4
18 7 3.6
19 3.8
20 8 4
21 4.2
22 4.4
23 9 4.6
24 4.8
25 10 5
26 5.2
27 5.4
28 11 5.6
29 5.8
30 6
31 12 6.2
32 6.4
33 13 6.6
34 6.8