Philips VTR9800 - How to Change the Sharing Sender to My Own Email Address

English
EN 79
will correspond to Chinese, the other will correspond to English, and the language
will be automatically identified and interpreted. (If you are not sure, please say several
words, and make judgment on the basis of the language displayed). If you use the built-
in microphone, you have to click the screen so as to change the language to be identi-
fied.
6.8 How to change the sharing sender to my own email
address?
When using the email file sharing function, the email sender is the default sender of
the Smart Meeting Recorder.(vtr9800_Service@139.com), you can modify the sender
to your own email.
Modification method:
Method 1, In the Settings -- Account -- Set the sender to enter the modification inter-
face, and click“save”when the modification is finished;
Method 2, When you share email, the sharing interface will pop up, click "Settings" on
the sharing interface. The sender can also enter the modification interface, and click
"save" when the modification is finished.
Remind
：
1. Please be sure to know the parameters required for email login (email account,
email password, host, port) when setting email sender. You can log in your official
email- check
whether SMTP service and the parameters of host/port is enabled in Settings.
2. If your email has opened a third party login authorization code, please enter the
email authorization code in the password box when setting the email sender.
3.It is recommended to use 465 for port parameter of the email sender. If sending fails,
you can try to modify 25.
4.If you are not clear about how to set the parameters of the email sender and the
email failed to send, please contact our customer service.