Phoenix Contact EV Charge Control Basic - Simplified Charging Sequence

Signal contacts and charging sequences
106377_en_04 PHOENIX CONTACT 29 / 68
5.6 Simplified charging sequence
Figure 5-6 Wiring of simplified charging sequence
With the simplified charging sequence, interim status B is skipped. The permissible
charging current value is limited to 10 A. Resistance value R
e
corresponds to the parallel
connection of resistors R2 and R3 from “Control Pilot wiring” on page 24.
Status C or D can be reached with the simplified charging sequence.
S1
R1
12 V
R
e
C
S
D1
Control Pilot
V
a
V
b
PWM