Phoenix Contact EV Charge Control Basic - Ordering Data; Technical Data

EV Charge Control Basic
6 / 68
PHOENIX CONTACT 106377_en_04
1.1 Ordering data
1.2 Technical data
Charging controller
Description Type Order No. Pcs. / Pkt.
Charging controller
for connection of case B and C, with
housing for DIN rail mounting
EV-CC-AC1-M3-CBC-SER-
HS
1622452 1
Charging controller for connection of case B and C, as
PCB
EV-CC-AC1-M3-CBC-SER-
PCB
1622453 1
Charging controller for connection of case C, with housing
for DIN rail mounting
EV-CC-AC1-M3-CC-SER-
HS
1622459 1
Charging controller for connection of case C, as PCB EV-CC-AC1-M3-CC-SER-
PCB
1622460 1
Order number 1622452 1622453 1622459 1622460
EV-CC-AC1-M3- CBC-SER-HS CBC-SER-PCB CC-SER-HS CC-SER-PCB
Supply
Input voltage range 100 V AC ... 240 V AC
No-load power consumption < 1 W
Frequency range 50 Hz ... 60 Hz
RS-485 interface
Protocol Modbus/RTU (slave)
Transmission speed 9.6 kbps (default)
Can be set: 9.6 kbps or 19.2 kbps
Transmission mode
data bits / parity / stop bits
8 / N / 1
Relay output C1/C2
Switching capacity, maximum 1500 VA
Switching voltage, maximum 250 V AC
Switching current, maximum 6 A
Output, locking
Voltage 12 V DC 12 V DC – –
Current, maximum 2 A 2 A – –
Adjustable switching time 600 ms (default) 600 ms (default) – –
Digital output