EasyManua.ls Logo

Physio Control LIFEPAK 20 - Performance Inspection Procedures

Physio Control LIFEPAK 20
202 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Paddle Accessory Options
5-2 LIFEPAK 20 Defibrillator/Monitor Operating Instructions
THERAPY ELECTRODES
The following paragraphs describe:
• About Therapy Electrodes
• Electrode Placement
• Cable Connection
• ECG Monitoring and Therapy Procedures
• Replacing and Removing Electrodes
•Testing
About Therapy Electrodes
There are two pre-gelled, self-adhesive therapy electrodes available: QUIK-COMBO pacing/
defibrillation/ECG electrodes and FAST-PATCH defibrillation/ECG electrodes (Figure 5-1).
QUIK-COMBO electrodes are used for defibrillation, synchronized cardioversion, ECG monitoring,
and pacing. FAST-PATCH electrodes can be used for defibrillation, synchronized cardioversion, and
ECG monitoring, but not for pacing. To use FAST-PATCH electrodes with the LIFEPAK 20 defibrillator/
monitor requires the addition of a FAST-PATCH defibrillation adapter cable (MIN 3011030).
Figure 5-1 QUIK-COMBO and FAST-PATCH Electrodes
A QUIK-COMBO or FAST-PATCH electrode set:
• Is a substitute for standard paddles.
• Provides a Lead II monitoring signal when placed in the anterior-lateral position.
• Quickly restores the ECG trace on the monitor following defibrillation.
To help prevent electrode damage:
• Do not fold the electrodes.
• Do not trim the electrodes.
• Do not crush, fold, or store the electrodes under heavy objects.
• Store electrodes in a cool, dry location (59° to 95°F or 15° to 35°C).

Table of Contents