phyFLEX
®
-i.MX 6
Enter the following command in the Post-build steps Command input field:
scp./myHelloWorldroot@192.168.3.11:/home/root/.,ssh
root@192.168.3.11./home/root/myHelloWorld
Be sure to enter the semicolon before the ssh command.
Ensure that the file myHelloWorld on the target will have execution rights,
because otherwise ssh will fail.
Click Apply.
Click OK.
Select Project ► Clean from the menu bar.
20
PHYTEC Messtechnik GmbH 2015 L-781e_7
To Next Page
Loading...
