Phytec phyFLEX-i.MX 6 - Stepping through and Watching Variable Contents

phyFLEX
®
-i.MX 6
3.2.4 Stepping through and Watching Variable Contents
In this part you will step through the example project with the debugger. You will also
learn how to check the content of a variable.
 Expand bu
f in the Variables window.
 Click the Step Over button in the Debug window to step to the next line. You will see the
content of the buf variable in the Variables window.
34
 PHYTEC Messtechnik GmbH 2015 L-781e_7